The spraying production line for glass bottles generally consists of a spraying room, a hanging chain, and an oven. Glass bottles also require pre-treatment of water, and a particular concern for glass bottles is the issue of sewage discharge. As for the quality of glass bottle spraying, it is related to water treatment, surface cleaning of the workpiece, conductivity of the hook, the size of the air volume, the amount of powder sprayed, and the level of the operator. Suggest choosing the following method for trial implementation: preprocessing section
The pre-treatment section for glass bottle spraying includes pre stripping, main stripping, surface adjustment, etc. If it is in the north, the temperature of the main stripping part should not be too low and insulation is needed. Otherwise, the treatment effect will not be ideal;
After pre-treatment, it is necessary to enter the preheating section, which usually takes 8-10 minutes. It is best for the glass bottle to have a certain amount of residual heat on the sprayed workpiece when it reaches the powder spraying room to increase the adhesion of the powder
Post time: Sep-21-2023