The influence of the batching process on the double-layer glass

Double-layer glass is more common in our lives, but do you know what material it is? The double-layer glass is made of high borosilicate glass. The appearance of the double-layer glass is crystal clear. The glass of this material has a very good effect on use, and it also has better viewing performance. The double-layer glass has the effect of double-layer heat preservation and heat insulation. It is very useful for us to make tea or hold hot water. The quality of the glass is inseparable from the batching process, and multiple factors are involved in the production process. Process, the double-layer glass manufacturer will introduce to you the influence of the batching process on the glass.

1. The cause of a bubble in the cup. A double-layer glass of insufficient quality may have some small bubbles. The cause of these bubbles may be caused by the uneven thickness of the quartz sand particles during the batching. Or if the temperature is too low during the ingredients, it will cause a bubble defect.

2. Boundary bubbles. The gap between the particles of the batching powder, the gas contained in the cullet, and the gas adsorbed on the surface of the cullet will be introduced into the double-layer glass. These gases should be discharged under certain melting conditions. But in reality, they more or less remain in the glass, causing bubbles.

3. Air bubbles caused by iron. If the ingredients contain iron, the carbon contained in the iron piece interacts with the residual gas in the glass to discharge the gas, and bubbles will be generated.

4. Mixture of stones. Ingredients stones are the unmelted component particles in the ingredients, that is, the material residues that are not completely melted. In most cases, the batching stones are quartz particles.

The above is an introduction about the influence of the double-layer glass batching process on the cup body. If you want the production of glass cups to be more excellent, you need to follow the standardized production process to prevent the incorporation of external impurities during the production process, resulting in bubbles in the glass. Once bubbles appear, it will seriously affect the quality of the product. The inability to sell normally will seriously affect the production efficiency of the enterprise, so it is very important to master the correct ingredient process.


Post time: Jul-05-2021

WhatsApp Online Chat !